SWIMMING POOLS WITH OVERFLOW
Swimming pools with overflow are mostly used for hotels, recreation centers and public baths. Due to the excellent quality of clean water they are also recommended for personal use.
SWIMMING POOLS WITH SKIMMER
Swimming pools with skimmer are most often used for personal purposes because of the small engine.
WHIRLPOOL
Whirlpools are mostly used as massage baths and have a large assortment of fittings.
STANDARD SWIMMING POOL MODELS
MOUNTING OF SWIMMING POOLS
When the swimming pool is going to be set up on the place of embedding (swimming pool larger than 6,0 x 3,0 x 1,5 m1) it is necessary to make the surface flat for its assembling. For the buried type of swimming pool it is necessary for the upper edge of the pool to be higher than the ground level for about 10 cm, in order to prevent rainfall from the nearby area from entering the pool. Dimensions of the scoop should be about 20-25 cm wider than the pool. For pools larger than 6,0 x 3,0 x 1,5 m, and if there is no flat surface for its assembling nearby, the scoop should be at least 60-75 cm wider than the pool. The bearing foundation board, which is 15-20 cm thick, has to be absolutely horizontal and even. For concreting the sides of the pool, it is not necessary to make the shell. The concreting is performed by filling the pool with water in layers of 25-30 cm. After each layer of water there is a layer of concrete added, and so on.
Leave a Comment